Aluminum Alloy 3102 H112 Good Elongation and Tensile Strength
Physical Properties of 3102 H112:
| Physical Properties | Metric | English | Comments |
| Density | 2.71 g/cc | 0.0979 lb/in³ | AA; Typical |
Mechanical Properties of 3102 H112:
| Mechanical Properties | Metric | English | Comments |
| Tensile Strength, Ultimate | 100 MPa | 14500 psi | / |
| Tensile Strength, Yield | 35.0 MPa | 5080 psi | / |
| Elongation at Break | 0.29 | 0.29 | / |
| Modulus of Elasticity | 71.0 GPa | 10300 ksi | / |
| Poissons Ratio | 0.33 | 0.33 | / |
| Shear Modulus | 26.7 GPa | 3870 ksi | Calculated |
Electrical Properties of 3102 H112:
| Electrical Properties | Metric | English | Comments |
| Electrical Resistivity | 0.00000590 ohm-cm | 0.00000590 ohm-cm | / |
Thermal Properties of 3102 H112:
| Thermal Properties | Metric | English | Comments |
| CTE, linear | 22.0 µm/m-°C | 12.2 µin/in-°F | / |
Component Elements Properties of 3102 H112:
| Component Elements Properties | Metric | English | Comments |
| Aluminum, Al | <= 97.8 % | <= 97.8 % | As remainder |
| Copper, Cu | <= 0.10 % | <= 0.10 % | / |
| Iron, Fe | <= 0.70 % | <= 0.70 % | / |
| Manganese, Mn | 0.05 - 0.40 % | 0.05 - 0.40 % | / |
| Other, each | <= 0.05 % | <= 0.05 % | / |
| Other, total | <= 0.15 % | <= 0.15 % | / |
| Silicon, Si | <= 0.40 % | <= 0.40 % | / |
| Titanium, Ti | <= 0.10 % | <= 0.10 % | / |
| Zinc, Zn | <= 0.30 % | <= 0.30 % | / |
Applications of 3102 Aluminum Alloy:
Product Details of 3102 Aluminum Sheet:
